Now Enrolling Students in Fundamentals of Welding Class

Johnson College’s Continuing Education Program is currently enrolling students in its next Fundamentals of Welding class, scheduled for Monday, December 13, 2021, on its campus in Scranton. Space is very limited. 

Students will learn the basics of the major welding processes. After fundamentals, students can enroll in an intermediate class in either Shielded Metal Arc Welding (Stick), Gas Tungsten Arc Welding (TIG), or Gas Metal Arc Welding (MIG). Each of these classes works toward plate certification to a common welding code. 

To learn more or enroll, visit https://johnson.edu/continuingeducation/ or contact the Johnson College Continuing Education department at 570-702-8979 or email continuinged@johnson.edu. 

Enroll Now in Fundamentals of Welding Class

Johnson College’s Continuing Education Program is currently enrolling students in its next Fundamentals of Welding class, scheduled for September on its campus in Scranton. Space is very limited.

Students will learn the basics of the major welding processes. After fundamentals, students can enroll in an intermediate class in either Shielded Metal Arc Welding (Stick), Gas Tungsten Arc Welding (TIG), or Gas Metal Arc Welding (MIG). Each of these classes works toward plate certification to a common welding code.

To learn more or enroll contact the Johnson College Continuing Education department at 570-702-8979, email continuinged@johnson.edu, or visit https://johnson.edu/continuingeducation/.

Next Pennsylvania State Vehicle Safety Inspectors Course Starts August 24

Johnson College’s Continuing Education Program will be holding a Pennsylvania State Vehicle Safety Inspectors course on campus on August 24, 26, 31, and September 2, 2021, from 6 p.m. to 9 p.m. Space is limited. The total cost of the course is $200 for cars and light trucks. There is an additional $75 fee for other vehicle categories. To learn more or enroll, visit johnson.edu/continuingeducation or contact the Continuing Education Department at 570-702-8979 or continuinged@johnson.edu. 

The Pennsylvania State Vehicle Safety Inspection course requirements include 12 classroom hours, a written test, and a two-hour tactile test scheduled independently with the instructor. Students must complete all requirements before receiving certification from PennDOT. Registration is on a first-come, first-served basis according to the date of payment. Class size is limited to 20 students, so participants are encouraged to register early. Applicants must be at least 18 years of age and have a valid operator’s license for each class of vehicle they intend to inspect. Classes will be held in the Automotive Center of the Weaver Building on the Johnson College campus.

Now Enrolling Students for 285-Hour Computer Numerical Control Training

Johnson College’s Continuing Education Program is now enrolling students in its next 285-hour Computer Numerical Control Operator training scheduled to begin on Monday, July 19, 2021, on the Johnson College campus in Scranton. The total cost of the 285-hour training is $3,950 and payment options are available. For more information or to register, visit https://johnson.edu/continuingeducation/ or contact Johnson College’s Continuing Education department at 570-702-8979 or continuinged@johnson.edu.

This 285-hour Computer Numerical Control Operator certificate program is designed for individuals looking to enter the high-demand machining field. The training covers theory and hands-on practice of both conventional and computer machining operations.  The course also covers shop and machine safety, blueprint reading, measuring instrument care and use, as well as math.

Now Enrolling Students in Forklift Operator Training Course

Johnson College’s Continuing Education program is offering a Forklift Operator Training Course on Saturday, May 8, 2021, from 8 a.m. to 5 p.m. in the Diesel Truck Technology Center on the College’s campus in Scranton. The cost of the course is $200, but if you are a current Johnson College student or alumni the cost is only $100. Space is limited! Visit johnson.edu/continuingeducation or contact our Continuing Education team at 570-702-8979 or continuinged@johnson.edu to learn more and enroll.

The forklift operator training is designed to familiarize students with OSHA Powered Industrial Truck Operator Training Requirements (29CFR Standard 1910.178 and ASME B56.1), provide current training requirements under the newly adopted standards, and assist participants in becoming an authorized operator of forklifts through theory and tactile testing. Nine hours of instruction including pre-operational inspection, picking up, traveling, and placing loads, parking procedures, refueling, and practical operation.

Continuing Education Program Now Enrolling Students in Specialized Soldering Training and Certification Course

Johnson College is offering a 16-hour IPC J-STD-001 Training and Certification Course through its Continuing Education Program. This specialized course introduces the materials, methods, and acceptance criteria for producing high-quality soldered electrical connections. The course will be held on the Johnson College campus during the late afternoons starting Monday, May 17, 2021, through Thursday, May 20, 2021. The total cost of the course is $500 and space is very limited. To learn more or to enroll, visit https://bit.ly/3fCIVur or contact the Johnson College Continuing Education Department at 570-702-8979 or continuinged@johnson.edu.

This course can be utilized by workers in industries such aerospace, bio-medical, computer technology, and electronics to name a few, who are interested in expanding their careers while helping their companies grow.

The 16-hour course will focus on modules 1 and 2 of the IPC J-STD-001. Module 1 includes General requirements: applicable documents; materials, components, and equipment requirements; general soldering and assembly requirements; cleaning; printed circuit board requirements; coating, encapsulation, and staking; anti-tampering; and rework and repair. In module 2, students will learn how to make wire and terminal connections; demonstrate wire stripping, wire tinning, and gold removal; and assemble turret, bifurcated, pierced, hooked, and hollow cup terminals to the highest performance standards. Upon successful completion, students will receive an IPC Certification in J-STD-001 soldering.

Now Enrolling Students in Forklift Operator Training Course

Johnson College’s Continuing Education program is offering a Forklift Operator Training Course on Saturday, February 20, 2021 from 8 a.m. to 5 p.m.in the Diesel Technology Center on the College’s campus in Scranton. The cost of the course is $200, but if you are a current Johnson College student or alumni the cost is only $100. Space is limited! Contact the Continuing Education team at 570-702-8979 or continuinged@johnson.edu to learn more and enroll.

The forklift operator training is designed to familiarize students with OSHA Powered Industrial Truck Operator Training Requirements (29CFR Standard 1910.178 and ASME B56.1), provide current training requirements under the newly adopted standards and to assist participants in becoming an authorized operator of forklifts through theory and tactile testing. 12 hours of instruction including pre-operational inspection, picking up, traveling and placing loads, parking procedures, refueling, and practical operation.

Johnson College’s Continuing Education Program distinguishes itself from the College’s 2-year degree programs and certificate courses by providing its adult students the opportunity to improve their skills to stay ahead of the competition, learn new technologies, and advance in their current career. The Continuing Education courses, many taught by industry professionals, are utilized and recognized by industry partners because they’re developed in partnership with industry. The program also includes pre-employment skills testing and exclusive online courses offering certification classes for essential industries. Johnson College also assists individual students and industry partners in obtaining funding or grants so their continuing education courses are cost effective. Johnson College trains the workforce of northeastern Pennsylvania by immersing continuing education, degree and certificate earning students into industry from day one. We Work, so our students succeed. For additional information on Johnson College’s Continuing Education Program, please call 570-702-8979, email continuinged@johnson.edu, or visit Johnson.edu/continuingeducation.

Now Enrolling Students in Forklift Operator Training Course

Johnson College’s Continuing Education program is offering a Forklift Operator Training Course on Saturday, February 6, 2021 from 8 a.m. to 5 p.m.in the Diesel Technology Center on the College’s campus in Scranton. The cost of the course is $200, but if you are a current Johnson College student or alumni the cost is only $100. Space is limited! Contact the Continuing Education team at 570-702-8979 or continuinged@johnson.edu to learn more and enroll.

The forklift operator training is designed to familiarize students with OSHA Powered Industrial Truck Operator Training Requirements (29CFR Standard 1910.178 and ASME B56.1), provide current training requirements under the newly adopted standards and to assist participants in becoming an authorized operator of forklifts through theory and tactile testing. 12 hours of instruction including pre-operational inspection, picking up, traveling and placing loads, parking procedures, refueling, and practical operation.

Johnson College’s Continuing Education Program distinguishes itself from the College’s 2-year degree programs and certificate courses by providing its adult students the opportunity to improve their skills to stay ahead of the competition, learn new technologies, and advance in their current career. The Continuing Education courses, many taught by industry professionals, are utilized and recognized by industry partners because they’re developed in partnership with industry. The program also includes pre-employment skills testing and exclusive online courses offering certification classes for essential industries. Johnson College also assists individual students and industry partners in obtaining funding or grants so their continuing education courses are cost effective. Johnson College trains the workforce of northeastern Pennsylvania by immersing continuing education, degree and certificate earning students into industry from day one. We Work, so our students succeed. For additional information on Johnson College’s Continuing Education Program, please call 570-702-8979, email continuinged@johnson.edu, or visit Johnson.edu/continuingeducation.

Now Enrolling Students in OBDII Emissions Training Class

Johnson College’s Continuing Education Program is currently enrolling students into its OBDII Emissions Training class. The class will be held in Weaver Hall on the Johnson College campus on Monday, Feb. 22 and Tuesday, Feb. 23 from 6 p.m. to 10 p.m., and conclude with testing on Thursday, Feb. 25 at 6 p.m. Space is very limited to allow for social distancing. Face masks must be worn at all times while on campus. To learn more or enroll call 570-702-8979 or email continuinged@johnson.edu.

The OBDII computer monitors a vehicle’s emission control systems in real-time and is capable of informing a motorist or technician of a systemic issue the moment it occurs. The system operates through a series of indicator lights, drive cycles, trouble codes and readiness monitors. During an inspection, an emission analyzer scan tool plugs into the diagnostic connector that is attached to the OBDII computer and communicates with the vehicle. The OBDII computer relays to the scan tool whether it has discovered errors in the emission control systems. The emission analyzer then determines whether the vehicle is being operated in compliance with emission standards. For more information visit https://johnson.edu/continuing-education/odbii-emissions-licensing/.

The class fee of $180 is paid to Johnson College and a study material and testing fee of $39.99 is paid directly to the PA Training Portal.